Moderator: MudBug
Texas Sheepdawg wrote:Disassemble and inspect everything. Clean the bolt carrier and make sure the firing pin retention pin is fully seated. Lube everything up and just hand cycle the action to help break it in. If issue continues just keep inspecting each part for abnormal wear. New ARs like to run a bit wet to break in. Don’t be afraid to oil it goood.
MasterBlaster45 wrote:The magizines from bear creek work without any jams in my new bear creek upper,my bushmaster upper hangs up alot with bushmaster mags,I was so shocked with the BC upper 30 shots and not one jam,5 round mags are in stock at BC,around 53.00,hope this helps!!!
Users browsing this forum: No registered users and 83 guests