shoulder tenderizer ready to be applied
Posted: Sun Apr 10, 2016 8:37 pm
test ladders all set, now just to wait for the weather to break.
with only 100 pcs of brass to work with these arent full min to max ladders. i started at max and went down .5 grains per step until i was at least 5½ grains down from max.
240 XTP mag on the left
250 FTX in the middle
300 XTP mag on the right.
all loaded over lil gun. once i recycle this brass around the block again, ill get the D0-63 out for the 300's and see how that does with the heavies compared to 1680.
with only 100 pcs of brass to work with these arent full min to max ladders. i started at max and went down .5 grains per step until i was at least 5½ grains down from max.
240 XTP mag on the left
250 FTX in the middle
300 XTP mag on the right.
all loaded over lil gun. once i recycle this brass around the block again, ill get the D0-63 out for the 300's and see how that does with the heavies compared to 1680.