Need advice
Posted: Thu Oct 06, 2016 6:48 pm
Need a little help here. I'm not new to reloading (11 wildcat chambers) but I am new to straight wall cases.
Here is what I have
Resized my brass, chamfered inside and out, primed with 7 1/2 primers, 37gr H110 under 275gr Barnes seated to just fit in the mag. Now to the part I'm stumped on is the crimp. Do I need to crimp and if so how much? I've never had to crimp before.
Here is what I have
Resized my brass, chamfered inside and out, primed with 7 1/2 primers, 37gr H110 under 275gr Barnes seated to just fit in the mag. Now to the part I'm stumped on is the crimp. Do I need to crimp and if so how much? I've never had to crimp before.