Talk about your 450b reloading experience, ask questions, etc...
Moderator: MudBug
Forum rules
Please try and keep it safe!
This information is the responsibility of the community, not the forum. 450bushmaster.net is not responsible if you blow yourselves up.
by pwoller » Thu Jul 01, 2021 8:57 pm
I need a Lillie help reloading the bushmaster round. I feel like I’m relearning this whole deal again as this is my first straight wall cartridge.
I’m using the Lee pace setter set and if I follow the instructions for the resizing die my cases are growing more then I expected. They go in at 1.690 and come out at 1.705. So now they are over spec and need trimmed? If I back the die out they grow less but I thought then the whole case doesn’t get resized. Does that matter? How far should I turn out the resizing die or do I just need to start trimming? This is for an AR.
-
pwoller
-
- Posts: 18
- Joined: Fri Aug 05, 2016 9:29 pm
by pwoller » Thu Jul 01, 2021 11:12 pm
I think my question is how do you set the resizing die for this cartridge? No shoulder to bump that’s how I set up my bottle neck cartridges. Per the instructions I’m sizing them way too much to get the length growth I’m seeing.
Last edited by
pwoller on Fri Jul 02, 2021 7:41 am, edited 1 time in total.
-
pwoller
-
- Posts: 18
- Joined: Fri Aug 05, 2016 9:29 pm
by MOOSE EARS » Fri Jul 02, 2021 4:32 am
Full length resize just like any straight wall case. "Kiss the shellholder" has always worked for me..
-
MOOSE EARS
-
- Posts: 170
- Joined: Sun Nov 17, 2013 3:50 pm
by Hoot » Fri Jul 02, 2021 10:17 pm
MOOSE EARS wrote:Full length resize just like any straight wall case. "Kiss the shellholder" has always worked for me..
Ditto for me but I'm using the Hornady die set.
Hoot
In Theory, there is no difference between theory and practice. In Practice, there is.
-
Hoot
-
- Posts: 5085
- Joined: Tue Feb 09, 2010 9:34 am
- Location: Minnesota
by pwoller » Fri Jul 02, 2021 10:57 pm
Do you trim them to 1.7 if they end up over that measurement?
-
pwoller
-
- Posts: 18
- Joined: Fri Aug 05, 2016 9:29 pm
by Hoot » Sat Jul 03, 2021 3:20 am
pwoller wrote:Do you trim them to 1.7 if they end up over that measurement?
I've had a couple grow to 1.70 but none beyond 1.70. The first time through, most sit in the 1.690-1.697 range.
Hoot
In Theory, there is no difference between theory and practice. In Practice, there is.
-
Hoot
-
- Posts: 5085
- Joined: Tue Feb 09, 2010 9:34 am
- Location: Minnesota
Return to Reloading for the 450b
Who is online
Users browsing this forum: Google [Bot] and 215 guests