Moderator: MudBug
Racre wrote:Has anybody reloaded 450 bushmaster withe lil gun and hornady 250 grain xtp bullets. I cannot find in for this bullet.
Racre wrote:Has anybody reloaded 450 bushmaster withe lil gun and hornady 250 grain xtp bullets. I cannot find in for this bullet.
s4s4u wrote:Racre wrote:Has anybody reloaded 450 bushmaster withe lil gun and hornady 250 grain xtp bullets. I cannot find in for this bullet.
Curious about the reference to 410 in the title, but have loaded up some of those with 38 grains of lil gun to try. The 250 XTP is tougher than Hornady gives them credit for. I have a friend that loads them hot from his 460 S&W 15" Encore barrel and uses them for deer hunting. He tells me that they knock the fire out of them and few even take step when hit. There isn't a lot left of the bullet afterward, on those that he has recovered, but dead is dead. I am going to do some water jug testing once the weather warms up as they won't let me do that at the 100 yard underground range for some reason. And then I may try them in the fall, depending on results. The XTP-Mag bullets are tougher for certain, but not gonna sleep on the XTP, yet.
s4s4u wrote:Racre wrote:Has anybody reloaded 450 bushmaster withe lil gun and hornady 250 grain xtp bullets. I cannot find in for this bullet.
Curious about the reference to 410 in the title, but have loaded up some of those with 38 grains of lil gun to try. The 250 XTP is tougher than Hornady gives them credit for. I have a friend that loads them hot from his 460 S&W 15" Encore barrel and uses them for deer hunting. He tells me that they knock the fire out of them and few even take step when hit. There isn't a lot left of the bullet afterward, on those that he has recovered, but dead is dead. I am going to do some water jug testing once the weather warms up as they won't let me do that at the 100 yard underground range for some reason. And then I may try them in the fall, depending on results. The XTP-Mag bullets are tougher for certain, but not gonna sleep on the XTP, yet.
Hoot wrote:The original post was a reply in a thread with that title, in the reloading drop box sub-forum. No one goes there and I thought he would get more responses if I moved it to the reloading for the 450b sub-forum. In moving the post, it took the title from the previous thread along with it. Then there was a second post and I tried merging them both here. This is something that as a moderator, I don't get the opportunity to do and I obviously hosed it up. Mudbug isn't available for coaching and we're on our own here. Luckily, the earth didn't switch poles or anything serious result from my futile effort. Won't happen again. Any post that I find out of position will languish there going forward.
Hoot
Racre wrote:I did not put the 410 powder in the title someone else from this forum did when i asked the question. I ordered these from midway usa not realizing it was going to be hard to find reload data for my 450 bushmaster. I went to Hornady website they only show three different kinds of bullets for 450 bushmaster. Yes I am new to the reloading which is a great thing. I am just wanting to be directed to were can find safe data using accurate 5744 powder. close I get from there website is a 250 gr nosler hp. Is that similar to the 250 gr xtp jacketed hollow point that hornady makes?
Return to Reloading for the 450b
Users browsing this forum: No registered users and 110 guests